AskDefine | Define vertebrae

Dictionary Definition

vertebra n : one of the bony segments of the spinal column [also: vertebrae (pl)]vertebrae See vertebra

User Contributed Dictionary

English

Noun

vertebrae
  1. Plural of vertebra|nodot=1; the bones that make up the spinal column.

Extensive Definition

The Vertebral column (singular: vertebra) are the individual irregular bones that make up the spinal column (aka ischis) — a flexuous and flexible column common to all Vertebrates.
There are normally thirty-three (33) vertebrae in humans, including the five that are fused to form the sacrum (the others are separated by intervertebral discs) and the four coccygeal bones which form the tailbone. The upper three regions comprise the remaining 24, and are grouped under the names cervical (7 vertebrae), thoracic (12 vertebrae) and lumbar (5 vertebrae), according to the regions they occupy. This number is sometimes increased by an additional vertebra in one region, or it may be diminished in one region, the deficiency often being supplied by an additional vertebra in another. The number of cervical vertebrae is, however, very rarely increased or diminished.
With the exception of the first and second cervical, the true or movable vertebrae (the upper three regions) present certain common characteristics which are best studied by examining one from the middle of the thoracic region.

General structure

A typical vertebra consists of two essential parts: an anterior (front) segment, which is the vertebral body; and a posterior part – the vertebral (neural) arch – which encloses the vertebral foramen. The vertebral arch is formed by a pair of pedicles and a pair of laminae, and supports seven processes, four articular, two transverse, and one spinous, the latter also being known as the neural spine.
When the vertebrae are articulated with each other, the bodies form a strong pillar for the support of the head and trunk, and the vertebral foramina constitute a canal for the protection of the medulla spinalis (spinal cord). In between every pair of vertebrae are two apertures, the intervertebral foramina, one on either side, for the transmission of the spinal nerves and vessels.
Two transverse processes and one spinous process are posterior to (behind) the vertebral body. The spinous process comes out the back, one transverse process comes out the left, and one on the right. The spinous processes of the cervical and lumbar regions can be felt through the skin. Superior and inferior articular facets on each vertebra act to restrict the range of movement possible. These facets are joined by a thin portion of the neural arch called the pars interarticularis.

Regions

Cervical

Note: For more detailed information, see Cervical vertebrae
These are generally small and delicate. Their spinous processes are short (with the exception of C2 and C7, which have palpable spinous processes), and often split. Numbered top-to-bottom from C1-C7, atlas (C1) and axis (C2), are the vertebrae that allow the neck and head so much movement. For the most part, the atlanto-occipital joint allows the skull to move up and down, while the atlanto-axial joint allows the upper neck to twist left and right. The axis also sits upon the first intervertebral disk of the spinal column. All mammals except manatees and sloths have seven cervical vertebrae, whatever the length of the neck.

Thoracic

Note: For more detailed information, see Thoracic vertebrae
Their spinous processes have surfaces that articulate with the ribs. Some rotation can occur between the thoracic vertebrae, but their connection with the rib cage prevents much flexion or other excursion. They may also be known as 'dorsal vertebrae', in the human context.

Lumbar

Note: For more detailed information, see Lumbar vertebrae
These vertebrae are very robust in construction, as they must support more weight than other vertebrae. They allow significant flexion and extension, moderate lateral flexion (sidebending), and a small degree of rotation. The discs between these vertebrae create a lumbar lordosis (curvature that is concave posteriorly) in the human spine.

Sacral

Note: For more detailed information, see Sacral vertebrae
There are 5 vertebrae (S1-S5). They are fused in maturity, with no intervertebral discs.

Coccygeal

Note: For more detailed information, see Coccygeal vertebrae
There are 3-5 vertebrae (Co1-Co5), again fused, with no intervertebral discs. Many animals have a greater number of "tail vertebrae" and, in animals, they are more commonly known as "caudal vertebrae." Pain at the coccyx (tailbone) is known as coccydynia.

Development

The striking segmented pattern of the human spine is established during embryogenesis when the precursor of the vertebrae, the somites, are rhythmically added to the forming posterior part of the embryo. In human, somite formation begins around the third week post-fertilization and continues until a total of around 52 somites are formed. The somites are epithelial spheres that contain the precursors of the vertebrae, the ribs, the skeletal muscles of the body wall and limbs, and the dermis of the back. The periodicity of somite distribution and production is thought to be imposed by a molecular oscillator or clock acting in cells of the presomitic mesoderm (PSM). Somites form soon after the beginning of gastrulation, on both sides of the neural tube from a tissue called the presomitic mesoderm (PSM). The PSM is part of the paraxial mesoderm and is generated caudally by gastrulation when cells ingress through the primitive streak, and later, through the tail bud. Soon after their formation, somites become subdivided into the dermomyotome dorsally, which gives rise to the muscles and dermis, and the sclerotome ventrally which will form the spine components. Sclerotomes become subvidided into an anterior and a posterior compartment. This subdivision plays a key role in the definitive patterning of vertebrae which form when the posterior part of one somite fuses to the anterior part of the consecutive somite during a process termed resegmentation. Disruption of the somitogenesis process in humans results in diseases such as congenital scoliosis. So far, the human homologues of three genes associated to the mouse segmentation clock (MESP2, DLL3 and LFNG) have been shown to be mutated in human patients with human congenital scoliosis suggesting that the mechanisms involved in vertebral segmentation are conserved across vertebrates. In humans the first four somites are incoporated in the basi-occipital bone of the skull and the next 33 somites will form the vertebrae. The remaining posterior somites degenerate. During the fourth week of embryonic development, the sclerotomes shift their position to surround the spinal cord and the notochord. The sclerotome is made of mesoderm and originates from the ventromedial part of the somites. This column of tissue has a segmented appearance, with alternating areas of dense and less dense areas.
As the sclerotome develops, it condenses further eventually developing into the vertebral body. Development of the appropriate shapes of the vertebral bodies is regulated by HOX genes.
The less dense tissue that separates the sclerotome segments develop into the intervertebral discs.
The notochord disappears in the sclerotome (vertebral body) segments, but persists in the region of the intervertebral discs as the nucleus pulposus. The nucleus pulposus and the fibers of the annulus fibrosus make up the intervertebral disc.
The primary curves (thoracic and sacral curvatures) form during fetal development. The secondary curves develop after birth. The cervical curvature forms as a result of lifting the head and the lumbar curvature forms as a result of walking.
There are various defects associated with vertebral development. Scoliosis can result from improper fusion of the vertebrae. In Klippel-Feil anomaly patients have two or more cervical vertebrae that are fused together, along with other associated birth defects. One of the most serious defects is failure of the vertebral arches to fuse. This results in a condition called spina bifida. There are several variations of spina bifida that reflect the severity of the defect.

Footnotes

References

vertebrae in Arabic: فقرة
vertebrae in Bulgarian: Прешлен
vertebrae in Catalan: Vèrtebra
vertebrae in Czech: Obratel
vertebrae in German: Wirbel (Anatomie)
vertebrae in Spanish: Vértebra
vertebrae in Esperanto: Vertebro
vertebrae in Basque: Orno
vertebrae in French: Vertèbre
vertebrae in Galician: Vértebra
vertebrae in Indonesian: Tulang punggung
vertebrae in Italian: Vertebra
vertebrae in Hebrew: חוליה (אנטומיה)
vertebrae in Kurdish: Movik
vertebrae in Latin: Vertebra
vertebrae in Latvian: Skriemeļi
vertebrae in Lithuanian: Slankstelis
vertebrae in Lingala: Mokúwa mwa mokɔngɔ
vertebrae in Hungarian: Gerinc
vertebrae in Dutch: Wervel (anatomie)
vertebrae in Norwegian: Virvel
vertebrae in Japanese: 椎骨
vertebrae in Polish: Kręg
vertebrae in Portuguese: Vértebra
vertebrae in Russian: Позвоночник человека
vertebrae in Simple English: Vertebra
vertebrae in Slovak: Stavec
vertebrae in Sundanese: Vertebra
vertebrae in Finnish: Nikama
vertebrae in Swedish: Ryggkota
vertebrae in Telugu: వెన్నుపూస
vertebrae in Turkish: Omur
vertebrae in Ukrainian: Хребці
vertebrae in Walloon: Cronzoxh
Privacy Policy, About Us, Terms and Conditions, Contact Us
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2
Material from Wikipedia, Wiktionary, Dict
Valid HTML 4.01 Strict, Valid CSS Level 2.1